Note: P/N 4859 is not the same module used in our Panacea taillights nor is it compatible with aftermarket or accessory modules that alter the functions of the stock taillight and turn signals. If you have already made modifications to your bike's taillight and/or turn signals, you will have to return your bike to stock form before installing our Controller. Bikes equipped with factory security system and low-draw or L.E.D. lights also require P/N 4857.
A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, and brake lights; not just brake/turn like our competitors! It can be used with our L.E.D. Silver Bullets, our incandescent Fender Strut Lights (P/N 2115), stock turn signals, or any single filament light you may already have installed on the rear of your bike. Completely plug-in for most '96-newer Harley-Davidsons with single filament turn signals and a taillight with running and brake functions. Compatible with '02-later H-D factory cruise control. Pulsing Brake feature can be turned on or off easily.
Fits: Direct plug-in for: '96-'09 Softails (except FXCW/C), '97-'09 Dynas (except '09 FXDB), '97-'10 Electra Glides, (except '09 FLTRSE), '06-'09 Street Glides, '98-'09 Road Glides & '97-'09 Road Kings, & '99-'03 Sportsters. For installation on earlier Models or '04-'09 Sportsters you will need a 6-Pin to 8-Pin Adapter (4831) or 8-Pin Hardwire Adapter (4832).
Küryakyn on Facebook
;){kind=small}
